Pinewood Derby Software
for
Event and Race
Management

Race Management Software Comparison

Below is a comparison of the three most popular race management software packages. Decide for yourself, based on the features that you want, which software package will work best for your race.

Features Software Package
GrandPrix Race Manager DerbyMaster RaceVIEW
Version# 3.0 6.0 1.6
Number of
Lanes Supported
1 to 8 1 to 24 3 to 8
Configure to race Cars, Semi Trucks, Rockets or Boats
Serial Timers Supported Fast Track
The JUDGE
NewBold DT1000, DT2000 & DT8000
RaceMaster IV
Other Serial Timers (Note 1)
Fast Track
The JUDGE
NewBold DT1000, DT2000 & DT8000
Fast Track
The JUDGE
NewBold DT8000
Parallel Timers Supported Pack 471's Circuit
World's Least Expensive Pinewood Derby Timer
Applied Machine Control, Inc.'s Circuit
or similar circuits (Note 2)
Solenoid Start Support (Note 3)
Light Tree Support (Note 4)
Operating Systems Supported Windows 95/98/ME/NT/2000/XP Windows 95/98/ME/NT/2000/XP Windows 95/98/NT 4.0/2000
(Note 5)
Customize to Your Organization
Assign Your Own Car Numbers
Race Methods Supported Perfect-N Series
Lane Rotation
Stearns (Note 6)
Chaotic-Rotation (Note 6)
Round Robin (Note 6)
Custom (Note 6)
Stearns
Lane Rotation
Single Elimination
Double Elimination
Ladderless Multiple-Elimination - Elimination Round
Chaotic-Rotation - Finals Round
Race Schemes Supported Top finishers from a racing group can be advanced to a succeeding round, if desired. Unlimited number of rounds.

Top finishers from each racing group can be raced in a Grand Finals round, if desired.
Multiple rounds
Elimination Round - To determine finalists

Finals Round
Race Scoring Cumulative, Average or Single Fastest Times - Auto or Manual
Cumulative Points - Auto or Manual
Cumulative or Average Times - Auto or Manual (Note 7)
Cumulative Points - Manual
Cumulative Points (Note 8)
Run Tie Breakers
Design and Special Awards
Unlimited number

Up to 50
Large Screen Displays Race Results
On Deck Racers
Final Standings
Awards
Race Results
Final Standings
Awards
Lane Assignments
Race Results
Final Standings
Lane and Car Statistics
Demo Version Available
Cost $60.00 - Online Download
$60.00 + S&H - On CD-ROM
$59.95 + S&H $60.00 + S&H
Web Site http://grandprix-software-central.com/gprm/ http://enterprisingideas.com/derbymaster/ http://www.raceview.com/


Notes:


# Software Note
1 GPRM Many other serial timers can be supported as long as you can find out the settings to communicate with the timer and what software commands the timer will accept, if any.
2 GPRM Supports parallel port sensor system circuits with sensor and start inputs on any parallel port pins 10 - 13 and 15, with ground on any pin from 18 to 25. The start switch input signal must behave the same as the sensor input signals.
3 GPRM Supports solenoid start on any parallel port pin from 2 to 9, with ground on any pin from 18 to 25. Supports solenoid start with a serial timer that will accept a software command to trigger the solenoid.
4 GPRM Supports light tree on any parallel port pins from 2 to 9, with ground on any pin from 18 to 25.
5 RV May also work with Windows ME and XP, but their product info doesn't explicitly say so.
6 GPRM Perfect-N Type and Lane Rotation Charts can be generated by the software. Other types of charts can be imported or input manually as long as they will fit into a grid of lanes versus heats.
7 DM Will only allow times scoring if a supported timer is being used.
8 RV Will allow manual and auto time entry, but results scoring is done by points.